01 / Industries
Home and building panels
Wall panels, wardrobes, kitchen cabinets, ceiling panels, all-aluminum furniture and interior decorative boards.
FLAT LAMINATION PRODUCTION LINE
An integrated flat lamination production line for applying PVC, PET and PETG films to rigid panels. It supports panels up to 1,220 mm wide and combines surface cleaning, preheating, adhesive-film transfer, three-roller lamination, protective-film application and automatic edge trimming.
Product gallery & core data
Product images are loaded from the WooCommerce featured image and product gallery. Technical data is loaded from the ACF Technical Data field.
Technical data
Use these parameters as the product-page technical reference. Final configuration can be confirmed according to material, capacity and local power requirements.
Materials & applications
Built for decorative board manufacturers serving home furniture, interior finishing and building-material panel production.
Wall panels, wardrobes, kitchen cabinets, ceiling panels, all-aluminum furniture and interior decorative boards.
Carbon-crystal board, plywood, calcium silicate board, magnesium oxide board, aluminum panel, MDF and particle board.
PVC film, PET, PETG, wood-grain paper, HPL laminate, CPL sheet, acrylic, aluminum film, leather and decorative paper.
Designed for PUR reactive polyurethane hot-melt adhesive, a solvent-free and environmentally conscious bonding process.
Production route
The line is organized to keep the substrate clean, the adhesive layer controlled and the decorative material aligned through the lamination zone.
Aluminum-profile infeed conveyor transfers the base panel into the line and supports brushing before coating.
PUR glue coater controls adhesive transfer through silicone, steel and chrome-plated metering rollers.
Roll-fed or sheet-fed decorative material is introduced with unwind, braking and softening control.
Double-roller lamination applies stable pressure while electric thickness adjustment adapts to panel thickness.
Finished laminated panels exit through the outfeed conveyor for inspection, stacking or downstream handling.
Drive power 0.75 kW with 0.55 kW brush motor for stable panel transfer and surface preparation.
Drive power 2×1.5 kW + 0.75 kW, lifting power 0.37 kW and 2×7.5 kW heating power.
3 kW drive, 0.37 kW electric thickness adjustment, air-expansion unwind shaft and 100 N·m magnetic powder brake.
φ80 × 1400 conveyor rollers and 0.75 kW drive power move laminated panels out of the line smoothly.
Product FAQ
Yes. The line is designed for both roll-fed films and sheet-fed decorative materials, depending on the feeding configuration and final surface requirement.
The standard process uses PUR reactive polyurethane hot-melt adhesive, suitable for durable decorative panel bonding and low-emission production requirements.
Common substrates include MDF, particle board, plywood, calcium silicate board, magnesium oxide board, polymer plastic board, aluminum panel and honeycomb board.
Yes. Voltage, frequency, layout, material feeding, heating and output requirements can be confirmed during project engineering before production.
Tell us your substrate, surface material, adhesive preference, target speed, board size and local power standard. Our engineering team will recommend the right configuration.